Edgeブラウザで名前を付けて保存が選べない

Edgeブラウザ114.0.1823.37 (公式ビルド)を使っていて
名前を付けて保存ボタンを押したいのですが、ボタン要素を認識しなくなっていてダイアログ全体しか選択できなくなっています。結果ボタンを押せない状況です。以前は押せていたと思うのですが・・・
これは拡張機能がEdgeのバージョンアップに追い付いてないということでしょうか?何か情報お持ちの方はいらっしゃいますか?

1 Like

@minami

Open ui explorer and change the framework to active accessibility and then try to indicate the element

image

you can as well check the visual tree on the left to see if the element is identified or not…sometimes if if not identified it would be available in visual tree and you can select from there right click and use set as target element…

cheers

2 Likes

こんにちは

最新の組み合わせでは動作しているようです。

image

ご参考までに現状の設定です。

UiPath Studio 23.4.1+ UiAutomation 23.4.5
Edgeはバージョン 114.0.1823.37 (公式ビルド) (64 ビット)です。

1 Like

コミュニティ版ではこちらの手順でボタンが選択できるようになりました。ありがとうございます!

#商用利用中のUiエクスプローラv21.10.7では残念ながらダメでした・・

最新版であれば動くということですね・・さすがに商用利用してる版をおいそれとは上げられないのでもう少し調べてみます。
ありがとうございます。

もう少し深堀してみたところ、
最初はダウンロードの枠のみしか選択できない
→そのまま枠をターゲット要素として選択
→アンカー選択時に内部の各要素を選択できるようになる
→一旦アンカー含めて確定する
→再度要素を取り直すと、以降は問題ないようです。

一度21.10の環境でも試してみてはと思います。

2 Likes

@minami

It should be working on that as well…As I tried onan enterprise only…can you try reinducating it

Cheers

Hello,

Workaround found : keyboard shortcuts !

  1. Right-click on link (pop-up menu appears)
  2. Hotkey (selector = whole webpage), type n (n is the shortcut for “save as” in French language (Enregistrer sous), so you have to find the character shortcut who selects “save as”
  3. Hotkey (selector = whole webpage), type enter.

Et voilà :slight_smile:

1 Like

FYI

本件に関するナレッジベース公開された模様です。

2 Likes

ありがとうございます!
これは一番最初に試しました。
ただ、右クリックを無効にしてるサイトが多くて選択できない解決策でした

みたいですね。パッチが出るまで待ってられないので、標準ダウンロードフォルダにダウンロードさせてからコピーしなおすようにロジック修正してしまいました・・
アップグレードのコントロールをするかしないかが課題になりそうです。

1 Like

The easiest way for us is Edge-“UiPath Web Automation” plug-in update.
一番簡単な方法は、Edge-UiPathのプラグインアップデートです。(DeepL Translator)

Official thread for this issue:

This topic was automatically closed 3 days after the last reply. New replies are no longer allowed.