ローカルPCで作成しパブリッシュしたnupkgファイルを「C:\ProgramData\UiPath\Packages」直へ配置しUiPath Assistantで実行しようとした際、画像1の更新ボタンを押下しても読み込まれずロボットを認識していない状態です。こちら配置場所が悪いのか何か手順が足りないのかご教示いただければ幸いです。
【画像1】
ローカルPCで作成しパブリッシュしたnupkgファイルを「C:\ProgramData\UiPath\Packages」直へ配置しUiPath Assistantで実行しようとした際、画像1の更新ボタンを押下しても読み込まれずロボットを認識していない状態です。こちら配置場所が悪いのか何か手順が足りないのかご教示いただければ幸いです。
【画像1】
Thank you for replying.
The PC on which the robot is created and the PC on which it is run are the same, so the license is still attached to the robot.
Did you select and install Automation Developer in this image? Is this the correct question?
As you are aware, we selected and installed the Automation Developer.
not during installation
go to orchestrator-> tenant → manage access → assign automation developer role
cheers
We were able to connect to the orchestrator and grant the automation developer role. We were also able to confirm that the latest published version was installed and running in UiPath Assistant.
Thank you very much!
This topic was automatically closed 3 days after the last reply. New replies are no longer allowed.