Unable to get System.Runtime dependency to install properly

alex-m · February 8, 2021, 2:41am

I’m using Studio to invoke C# code in a sequence. It’s been working fine for almost a year in my project. However, yesterday I opened the project and the following error occurred when invoking the code:

Invoke code: No compiled code to run
error CS0012: The type ‘System.Attribute’ is defined in an assembly that is not referenced. You must add a reference to assembly ‘System.Runtime, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a’. At line -34

I’ve been through all of the forums and tried the following:

Uninstalling/Reinstalling Studio
Removing all packages and caches and then updating packages.
Moving my package installation directory to "C:\Program Files (x86)\UiPath\Studio\packages"

However, none of these have fixed the issue. I cannot attach my log, but here the tail of it:

WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
, HResult -2147024894
21:28:14.8000 => [ERROR] [UiPath.Studio.exe] [26] $LoadAssembly: Microsoft.Exchange.WebServices.Auth, Version=15.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35: System.IO.FileNotFoundException: Could not load file or assembly ‘Microsoft.IdentityModel, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35’ or one of its dependencies. The system cannot find the file specified.
File name: ‘Microsoft.IdentityModel, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35’
at System.Signature.GetSignature(Void* pCorSig, Int32 cCorSig, RuntimeFieldHandleInternal fieldHandle, IRuntimeMethodInfo methodHandle, RuntimeType declaringType)
at System.Reflection.RuntimePropertyInfo.get_Signature()
at System.Reflection.RuntimePropertyInfo.get_PropertyType()
at ActiproSoftware.Text.Languages.DotNet.Reflection.Implementation.BinaryAssemblyLoader.#aFc(#Lrc #wAf, MemberInfo #xAf)
at ActiproSoftware.Text.Languages.DotNet.Reflection.Implementation.BinaryAssemblyLoader.#cFc(#hsc #4Ub, Type #uAf)
at ActiproSoftware.Text.Languages.DotNet.Reflection.Implementation.BinaryAssemblyLoader.#XEc(Assembly #sxc)
at ActiproSoftware.Text.Languages.DotNet.Reflection.Implementation.BinaryAssemblyLoader.#iFc(Assembly #sxc)
at ActiproSoftware.Text.Languages.DotNet.Reflection.Implementation.AssemblyRepositoryBase.#30j(Assembly #sxc, IAssemblyName #4tc, IBinaryAssemblyMetadata #RDb)
at ActiproSoftware.Text.Languages.DotNet.Reflection.Implementation.AssemblyRepositoryBase.Create(Assembly assembly, IAssemblyName assemblyName, IBinaryAssemblyMetadata metadata)
at ActiproSoftware.Text.Languages.DotNet.Reflection.Implementation.FileBasedAssemblyRepository.Create(Assembly assembly, IAssemblyName assemblyName, IBinaryAssemblyMetadata metadata)
at ActiproSoftware.Text.Languages.DotNet.Reflection.Implementation.FileBasedAssemblyRepository.GetOrCreate(Assembly assembly, IAssemblyName assemblyName, String location)
at ActiproSoftware.Text.Languages.DotNet.Reflection.Implementation.AssemblyRepositoryBase.#uBh(Assembly #sxc, IAssemblyName #4tc, String #bVe)
at ActiproSoftware.Text.Languages.DotNet.Reflection.Implementation.AssemblyRepositoryBase.Load(Assembly assembly, IAssemblyName assemblyName)
at ActiproSoftware.Text.Languages.DotNet.Reflection.Implementation.AssemblyRepositoryBase.Load(String fullName)
at UiPath.Studio.Plugin.Workflow.ExpressionEditor.SyntaxService.LoadAssembly(LoadIntellisenseAssembliesContext context, String assemblyName, CancellationToken cancellationToken)

WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
, HResult -2147024894
21:28:14.8130 => [ERROR] [UiPath.Studio.exe] [26] $LoadAssembly: Microsoft.Exchange.WebServices.Auth, Version=15.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35: System.IO.FileNotFoundException: Could not load file or assembly ‘Microsoft.IdentityModel, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35’ or one of its dependencies. The system cannot find the file specified.
File name: ‘Microsoft.IdentityModel, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35’
at System.Signature.GetSignature(Void* pCorSig, Int32 cCorSig, RuntimeFieldHandleInternal fieldHandle, IRuntimeMethodInfo methodHandle, RuntimeType declaringType)
at System.Reflection.RuntimePropertyInfo.get_Signature()
at System.Reflection.RuntimePropertyInfo.get_PropertyType()
at ActiproSoftware.Text.Languages.DotNet.Reflection.Implementation.BinaryAssemblyLoader.#aFc(#Lrc #wAf, MemberInfo #xAf)
at ActiproSoftware.Text.Languages.DotNet.Reflection.Implementation.BinaryAssemblyLoader.#cFc(#hsc #4Ub, Type #uAf)
at ActiproSoftware.Text.Languages.DotNet.Reflection.Implementation.BinaryAssemblyLoader.#XEc(Assembly #sxc)
at ActiproSoftware.Text.Languages.DotNet.Reflection.Implementation.BinaryAssemblyLoader.#iFc(Assembly #sxc)
at ActiproSoftware.Text.Languages.DotNet.Reflection.Implementation.AssemblyRepositoryBase.#30j(Assembly #sxc, IAssemblyName #4tc, IBinaryAssemblyMetadata #RDb)
at ActiproSoftware.Text.Languages.DotNet.Reflection.Implementation.AssemblyRepositoryBase.Create(Assembly assembly, IAssemblyName assemblyName, IBinaryAssemblyMetadata metadata)
at ActiproSoftware.Text.Languages.DotNet.Reflection.Implementation.FileBasedAssemblyRepository.Create(Assembly assembly, IAssemblyName assemblyName, IBinaryAssemblyMetadata metadata)
at ActiproSoftware.Text.Languages.DotNet.Reflection.Implementation.FileBasedAssemblyRepository.GetOrCreate(Assembly assembly, IAssemblyName assemblyName, String location)
at ActiproSoftware.Text.Languages.DotNet.Reflection.Implementation.AssemblyRepositoryBase.#uBh(Assembly #sxc, IAssemblyName #4tc, String #bVe)
at ActiproSoftware.Text.Languages.DotNet.Reflection.Implementation.AssemblyRepositoryBase.Load(Assembly assembly, IAssemblyName assemblyName)
at ActiproSoftware.Text.Languages.DotNet.Reflection.Implementation.AssemblyRepositoryBase.Load(String fullName)
at UiPath.Studio.Plugin.Workflow.ExpressionEditor.SyntaxService.LoadAssembly(LoadIntellisenseAssembliesContext context, String assemblyName, CancellationToken cancellationToken)

WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
, HResult -2147024894
21:33:40.8898 => [ERROR] [UiPath.Studio.App.Logging.OutputLogger] [10] Invoke code: No compiled code to run
error CS0012: The type ‘System.Attribute’ is defined in an assembly that is not referenced. You must add a reference to assembly ‘System.Runtime, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a’. At line -34

system · February 10, 2021, 4:00pm

Hello @alex-m!

It seems that you have trouble getting an answer to your question in the first 24 hours.
Let us give you a few hints and helpful links.

First, make sure you browsed through our Forum FAQ Beginner’s Guide. It will teach you what should be included in your topic.

You can check out some of our resources directly, see below:

Always search first. It is the best way to quickly find your answer. Check out the icon for that.
Clicking the options button will let you set more specific topic search filters, i.e. only the ones with a solution.
Topic that contains most common solutions with example project files can be found here.
Read our official documentation where you can find a lot of information and instructions about each of our products:
Watch the videos on our official YouTube channel for more visual tutorials.
Meet us and our users on our Community Slack and ask your question there.

Hopefully this will let you easily find the solution/information you need. Once you have it, we would be happy if you could share your findings here and mark it as a solution. This will help other users find it in the future.

Thank you for helping us build our UiPath Community!

Cheers from your friendly
Forum_Staff

Pablito · February 12, 2021, 2:33pm

Hi @alex-m,
Apart from this error do you see any exclamation marks on activities or something like this?

Topic		Replies	Views
Invoke Code Issue Help studio , question	3	1463	December 28, 2020
Installation Error: UI Path Community Edition - UiPathStudioSetup.exe Help studio , setup	4	5166	October 29, 2018
Cannot load Assembly Help	14	4736	January 8, 2020
Invoke Code Error Could not load file or assembly Studio studio , bug , invoke-code	1	1066	October 17, 2022
Cannot add Microsoft.SharePointOnline.CSOM Help	1	1744	March 19, 2019

Most Active Users - Yesterday
Anil_G
ashokkarale
Ajay_Mishra
Gautham_Pattabiraman
BHUSHAN_NAGAONKAR1
vrdabberu
ABHIMANYU_THITE1
lrtetala
samantha_shah
shyamala_shyamu
More details...

Unable to get System.Runtime dependency to install properly

Related Topics