UiPath RPA Associate Certification Training - stuck / help needed - license newly assigned robot user

Learning Hub Academy Feedback
, , , , , , , , ,
1

Hello,

I am new to RPA and started the course UiPath RPA Associate Certification Training which I enrolled in on the 25th of october 2022. The solution might be simple but I have zero knowledge on the topic yet.

I was following all the video instructions of the video “First run with UiPath” in the subcourse Meet the UiPath Platform but then I got stuck at logging in with my newly robot assigned user into the downloaded Studio (community package) as shown 5:40 into the video.

Can anyone help? I will need step by step instructions to follow through, not just general verbal descriptions of what needs to be changed, but also how to do it exactly.

Feel free to ask for more input if necessary.
Screenshots available at the end of this post.

Thanks in advance!

Greetings,
PAM85

20221027_UP_RPA_Troubleshoot_001
20221027_UP_RPA_Troubleshoot_0011920×994 119 KB

20221027_UP_RPA_Troubleshoot_002bis
20221027_UP_RPA_Troubleshoot_002bis1919×998 107 KB

20221027_UP_RPA_Troubleshoot_003
20221027_UP_RPA_Troubleshoot_0031920×999 161 KB

20221027_UP_RPA_Troubleshoot_004bis
20221027_UP_RPA_Troubleshoot_004bis1872×939 156 KB

20221027_UP_RPA_Troubleshoot_005bis
20221027_UP_RPA_Troubleshoot_005bis1858×940 102 KB

20221027_UP_RPA_Troubleshoot_006
20221027_UP_RPA_Troubleshoot_0061869×938 112 KB

20221027_UP_RPA_Troubleshoot_007bis
20221027_UP_RPA_Troubleshoot_007bis1863×946 112 KB

20221027_UP_RPA_Troubleshoot_008bis
20221027_UP_RPA_Troubleshoot_008bis1873×951 113 KB

2

Hi @PAM85,

Did you assign to your user a license from the user page?

  • Go to “Manage Access” as in your 4th screenshot, select your user’s 3 dots at the end of the line, and click on edit:

image
image1692×504 51.5 KB

  • Looking at your licenses, you do have 1 unattended available.

  • Inside Edit menu, navigate to the 2nd screen, and make sure that your “Unattended Robot” is enabled, and it has your username and domain written there (Can be obtained from cmd → typing whoami)

image
image1468×818 73.1 KB

image

Last but not least, might be good to go to the machines menu, choose your machine, and check if it does have any runtime assigned:

image
image1336×303 24.2 KB

Hope this helps!

Best Regards,
Ignasi

1 Like
3

Hi @ignasi.peiris,

Thank you for your (very quick) help! I was finally able to log in with the new robot assigned user into the downloaded Studio community version.

Our versions seem to differ (and thus window content as well) so I am adding screenshots for other new users as well with what I changed or not.

Greetings,
PAM85

20221105_UP_RPA_Solution_01
20221105_UP_RPA_Solution_011869×885 115 KB

20221105_UP_RPA_Solution_02
20221105_UP_RPA_Solution_021863×904 83.6 KB

20221105_UP_RPA_Solution_03
20221105_UP_RPA_Solution_031861×897 108 KB

20221105_UP_RPA_Solution_04
20221105_UP_RPA_Solution_041869×901 84.3 KB

20221105_UP_RPA_Solution_05
20221105_UP_RPA_Solution_051860×959 117 KB

20221105_UP_RPA_Solution_06
20221105_UP_RPA_Solution_061872×958 68.6 KB

20221105_UP_RPA_Solution_07
20221105_UP_RPA_Solution_071308×706 114 KB

1 Like
4

Glad you solved it on your own!

Super cool that you shared the screenshots here, so others with the same issue can refer to this post :slight_smile:

Best Regards,
Ignasi Peiris

5

This topic was automatically closed 3 days after the last reply. New replies are no longer allowed.