Computer Vision cannot find element after a few hours

Build
, ,
#1

Hey there,

i am using UiPath Computer Vision on a remote desktop application. I have 2 problems working with CV.

  1. When the robot starts its all okay and no problems occur. The Problem is after 10 or 12 hours. Normally the robot is doing his job very well but then I get the error “Element is not found”. The screen is always the same because of a for each. But what can be the Problem that after 12 hours the robot says it can’t find the screen anymore?

  2. is there a possibility to let work the Computer Vision faster on the remote desktop?

If theres a question about my problem please ask, I would be very delightfull if someone can help me.

#2

Hello @Tolga_Camlice!

It seems that you have trouble getting an answer to your question in the first 24 hours.
Let us give you a few hints and helpful links.

First, make sure you browsed through our Forum FAQ Beginner’s Guide. It will teach you what should be included in your topic.

You can check out some of our resources directly, see below:

  1. Always search first. It is the best way to quickly find your answer. Check out the image icon for that.
    Clicking the options button will let you set more specific topic search filters, i.e. only the ones with a solution.

  2. Topic that contains most common solutions with example project files can be found here.

  3. Read our official documentation where you can find a lot of information and instructions about each of our products:

  4. Watch the videos on our official YouTube channel for more visual tutorials.

  5. Meet us and our users on our Community Slack and ask your question there.

Hopefully this will let you easily find the solution/information you need. Once you have it, we would be happy if you could share your findings here and mark it as a solution. This will help other users find it in the future.

Thank you for helping us build our UiPath Community!

Cheers from your friendly
Forum_Staff

#3

Hi @Tolga_Camlice,
Are you sure that remote session is not somehow blocked/locked by some amount of time?

1 Like
#4

Hi @Pablito,
yeah im sure about that, but i had another solution for this problem now thank you.

1 Like